Leopard 1A1 | Leopard 1A2 | Leopard 1A3 | Leopard 1A4 | Leopard 1A5 |
The Leopard 1A3 is a further improvement in the Leopard 1 line of MBTs. It is acquired after the Leopard 1A2. It has even heavier +1 front and side armor, has a +1 higher accuracy, and now has a bad stabilizer compared to no stabilizer before.
History[]
The next 110 vehicles in the fifth batch were fitted with a new welded turret, which was equipped with a new armour consisting of two spaced steel plates with a plastic filling between them, and a wedge-shaped gun mantlet, creating the Leopard 1A3.
Although the level of armor area density was equivalent to the A2's new welded version, the internal volume was increased by 1.2 m³ and the effective protection level was increased by half.
The improved TRP 2A independent sight was installed for the commander. Upgrades were identical to the 1A2 models, the Leopard 1A3A1 with the night sights, Leopard 1A3A2 with the new radios, and the Leopard 1A3A3 with both.
Weapons[]
Weapons | |||
---|---|---|---|
Type | Main Gun | MMG | No Weapon |
Name | L7A3 | MG-3 | |
Caliber | 105mm | 7,62mm | |
Ammo | x 35 | x 5200 | |
Range | Ground = N/A m Helicopters = N/A m Airplanes = N/A m |
Ground = N/A m Helicopters = N/A m Airplanes = N/A m |
|
Accuracy | 4 | 6 | |
AP Power | 6 | 0 | |
HE Power | 3 | 1 | |
Rate of fire | 7 r/min | 2181 r/min |
AirLand Battle[]
Gallery[]
See also[]
|